LoginRegistration
For instance: The List of VAK
About consortium subscription Contacts
(812) 4095364 Non-commercial partnership
St. Petersburg
university
consortium

Articles

"The Scientific Opinion" №12 (Psycho-pedagogical and philosophy of science), 2016

Mathematical and Computational Modeling of the Filtration Process of the Binder in the Textile Composite Material under Manufacturing RTM Method

Yu. I. Dimitrienko, Yu. V. Zakharova, I. O. Bogdanov
Price: 50 руб.
 The given paper considers a mathematical model of the dual problem of liquid binder fi ltration and solidifi cation kinetics in textile composite materials using the RTM method of manufacture. The main attention is focused on modeling of the fi ltration process of the liquid binder in a skeleton of the textile composite. An asymptotic averaging method in combination with the fi nite element method are used to solve the local fi ltration problem for
the periodicity cell of composite. The results of the numerical solution of the local problems of the liquid binder fi ltration in a textile composite are presented.
Keywords: solidifi cation, fi ltration, RTM method, multiscale modeling, periodicity cell,
textile composite, fi nite element method.
 
REFERENCES
1. Dmitriev, O.S., Kirillov, V.N., Mischenko, S.V., & Dmitriev, A.O. Heat and
mass transfer and kinetics of cure polymer composite material at autoclave vacuum
forming of products [Тепломассоперенос и кинетика отверждения полимерного
композиционного материала при автоклавном вакуумном формировании изделий].
Engineering Physics, 2010, 9, 3–12. Retrieved May 15, 2016, from viam.ru/public/
fi les/2010/2010-205541.pdf
2. Dmitriev, O.S., Kirillov, V.N., Zuev, A.V., &Cherepakhina, A.A. Infl uence of fi ller
types on the optimal cure cycles of thick-sectional polymer composites [Влияние типа
наполнителя на оптимальные режимы отверждения толстостенных ПКМ]. Klei,
Germetiki, Tekhnologii, 2011, 11, 27–36.
3. Kasatonov, I.S. Method for controlling the process of curing polymer composites
by dielectric characteristics [Метод контроля процесса отверждения полимерных
композитов по диэлектрическим характеристикам // Вопросы современной науки
и практики]. Problems of Contemporary Science and Practice. Vernadsky University,
2012, 1(37), 353–357.
4. Antyufeyeva, N.V., Zhuravlyova, P.L., Aleksashin, V.M., & Kutsevich, K.E. Infl uence of curing degree of binding agent on physical-mechanical properties of carbon
fi ber reinforced plastic (CFRM) and microstructure of interphase layer «Carbon Fiber—
Matrix» [Влияние степени отверждения связующего на физико-механические
свойства углепластика и микроструктуру межфазного слоя углеродное волокно/
матрица]. Klei, Germetiki, Tekhnologii, 2014, 12, 26–30.
5. Kutsevich, K.E., Aleksashin, V.M., Petrova, A.P., & Antyufeyeva, N.V. Investigation
of kinetics of reaction of cure adhesive-bonded binder [Исследование кинетики реакций
отверждения клеевых связующих]. Klei, Germetiki, Tekhnologii, 2014, 11, 27–31.
6. Barinov, D.Ya., Mayorova, I.A., Marahovskij, P.S., Zuev, A.V., Kucevich, K.E.,
& Lukina, N.F. Mathematical modeling of temperature fi elds during curing of thickwalled fi berglass plate [Математическое моделирование температурных полей при
отверждении толстостенной плиты стеклопластика]. Journal of Advanced Materials,
2015, 4, 5–14.
7. Cao, C., & Dancila, D.S. Damage and failure analysis of co-cured composite joints
with unidirectional lay-up. Proceedings of the 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, 2003, Vol. 7, pp.5470–5475.
8. Cao, C., &Dancila, D.S. Damage and failure analysis of co-cured composite joints
with quasi-isotropic lay-up. Proceedings of the AHS International 59th Annual Forum
& Technology Display, 2003, Phoenix, AZ.
9. Pan, L., Zhang, B., & Dai, F. Multi-objective optimization of co-cured composite
laminates with embedded viscoelastic damping layer. Journal of Materials Science and
Technology, 2009, 25 (5), 708–712.
10. Dimitrienko, Yu.I., & Sokolov, A.P. Multiscale modeling of elastic composite materials [Многомасштабное моделирование упругих композиционных
материалов]. Matematicheskoe Modelirovanie, 2012, 24 (5), 3–20.
11. Dimitrienko, Y.I., Sborschikov, S.V., Sokolov, A.P., & Shpakova, Y.V. Computational modeling of failure of textile composites [Численное моделирование процессов
разрушения тканевых композитов // Computational Continuum Mechanics, 2013,
6 (4), 389–402. doi: 10.7242/1999-6691/2013.6.4.43
12. Dimitrienko, Yu.I., Minin, V.V., & Syzdykov, E.K. Numerical modeling of heatmass-transfer and stress kinetics in thermodestructing composite shells [Численное
моделирование процессов тепломассопереноса и кинетики напряжений
в термодеструктирующих композитных оболочках]. Computational Technologies,
2012, 17(2), 44–60.
13. Dimitrienko, Yu.I., Koryakov, M.N., & Balakshin, A.I. Modeling of non-stationary
internal heat-mass-transfer in heat-shielding structures by the three-dimensional fi nite-element method [Моделирование нестационарного внутреннего тепломассопереноса
в теплозащитных конструкциях на основе трехмерного конечно-элементного
анализа]. Science and Education, 2013, 10. doi: 10.7463/1013.0606069
14. Dimitrienko, Yu.I., & Glazikov, M.L. Filtration process simulation in periodic porous structures [Моделирование процессов фильтрации в периодических
пористых средах]. Vestnik MGTU. Natural Sciences, 2003, 1, 59–71.
15. Dimitrienko, Yu.I., & Dimitrienko, I.D. Simulation of local transfer in periodic
porous media. European Journal of Mechanics/B-Fluids, 2013, 1, 174–179.
16. Dimitrienko, Yu.I., Levina, A.I., & Galitsin, A. Finite Element Analysis of
Local Gas-Dynamic Processes in the Three-Dimensional Porous Structures [Конечно-
элементный анализ локальных газодинамических процессов в трехмерных
пористых структурах]. Vestnik MGTU. Natural Sciences. SPEC, 2011, 50–66.
17. Dimitrienko, Yu.I., Sokolov, A.P., & Shpakova, Yu.V. Computer-aided analysis
of micromechanics and damage of composite materials based on multiscale homogenization method. Proceedings of the Multiscale Materials Modeling 2012 Conference,
2012, Vol. 1535. doi:10.1557/opl.2013.466.
18. Roache P. Computational fl uid dynamics [Вычислительная гидродинамика].
1980, Moscow: Mir.
19. Dimitrienko, Yu. I. Mechanics of composite materials at high temperatures
Price: 50 рублей
To order